Where Is the Radiator Petcock on a 2007 Odyssey

Radiator drain valve location

Where is the radiator drain valve?

Many DIYers want to flush their car's coolant themselves and the first obstacle they encounter is finding the radiator drain valve. The valve, called a petcock, has changed since the old days when it was made from brass with a "T" handle.

Old style brass radiator drain "petcock"

Radiator drain valve location

The new drain valves are plastic and are a twist-lock design—if the radiator has one.

Plastic radiator drain valve petcock or "drain cock."

And that's the point; most car makers have eliminated the radiator drain valve from their radiators.

Why no radiator drain valve?

It's really pretty simple. First, radiator drain valves are never used by professional mechanics. If a shop is going to flush a cooling system, they'd install a flushing tee and attach flushing equipment. If they're going to do a radiator drain and fill, they'll loosen the hose clamp on the lower radiator hose and just remove the hose. All the coolant from the radiator and lower part of the engine drains out quickly using that technique. Then the mechanic simply reinstalls the lower radiator hose and refills the system. The entire drain procedure takes about 5-mins.

Opening a radiator drain valve can cause BIG problems

But what if your radiator has a drain valve? Well, my advice is: DON'T OPEN IT! Plastic drain valves usually have a flat portion for twisting and an O-ring washer at the end of the valve. Over time, the O-ring welds itself to the drain valve seat. When you try opening the valve you can encounter several really bad scenarios:

1): Since the O-ring is welded to the seat, the flat portion twists and breaks off. Now the valve can't be opened.

2): The valve opens slightly and the flat either breaks off or the engine stem breaks off, leaving a portion of the stem inside the valve. Coolant begins leaking out and there's no way to stop it. Sometimes you can remove the broken portion with a needle nose pliers and then buy a replacement valve stem. However, that means a trip to the auto parts store. Do you have a second vehicle to make that trip? And, does the auto parts store stock that particular valve? If you can't find a replacement valve stem, you'll have to replace the radiator. Cost—at least $200 if you replace it yourself or up to $600 if you have to take it to a shop. Oh, then there's the towing charge.

Which radiator drain is in your radiator? Where will you find a replacement on short notice?

3) You crack the tank. Keep in mind that the newer coolants are long life chemistries, so you're probably not changing coolant for 5 or 10 years. The plastic tanks on modern radiator can get brittle and crack if you apply twisting stress to the drain valve. Why risk damaging a perfectly good radiator.

Here's how to drain your radiator

Loosen the hose clamp on the lower radiator hose. If it's a worm drive clamp, use a screwdriver to loosen it. If it's a constant tension spring clamp, use a slip jaw pump pliers or a special hose clamp removal pliers to open the clamp and move it away from the radiator neck.

Worm drive and spring style hose clamps

Spring hose clamp removal and installation pliers

Next, slide a radiator hose removal tool between the hose and the neck and slide it around

OTC 4521 Hose Removal Tool New

the neck to break the bond between the hose and the neck. Then twist the hose off and let the coolant drain.

Removing the lower radiator hose removes more coolant

A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you're not draining the radiator completely. That's why shops always remove the lower radiator hose. That drains the entire radiator AND most of the coolant from the engine.

©, 2017 Rick Muscoplat

Save

Save

Posted on June 28, 2017 by Rick Muscoplat

---

Where Is the Radiator Petcock on a 2007 Odyssey

Source: https://ricksfreeautorepairadvice.com/radiator-drain-valve-location/

Share this post